​
​Magnetic Additive for Paint
Simply mix additive into any color paint and apply to walls, canvas or board.  

1.  Outline area with ruler and pencil. 
2. Tape around pencil line with painter's tape.  
​3. Pour measured paint into tray & stir 1 mn.
4. Add additive to paint & stir 1 mn.
5. Let dry well between coats (45 mn.) 
6. Test for strength.   
7.  Let cure 18-24 hours.  

---

Better Than Canned Magnetic Primer

•  IT's EASY TO STIR   
Simply add the additive to any color paint. Stir for  one minute.

•  YOU CHOOSE THE COLOR   
Use whatever color paint you want! 

• IT's QUICKER   
You'll need fewer coats.

• IT's STRONGER
With no need for a top coat, magnets stick better.

• IT's CLEANER & DOESN'T SMELL 
Almost no splatter.  Cleans with water.  Doesn't stink.
 
• ADDITIVE GIVES MORE OPTIONS   
No top coat is needed, however, you may add chalk board paint, white board paint, or faux finish.

---

​​COVERAGE  
Mix 1 pouch MagArt Additive with 2 cups of paint.
Covers up to 10 sq. feet
2-3 coats
 Total time: 2-3 hours 

Large Size Additive Covers up to 50 sq ft.
Stir contents into
​2.5 Qts.  paint. 

You can use MagArt Additive to paint part of a wall, a whole wall - or a canvas!

MagArt Additive - Magnetic Additive for Paint

$15.95 $14.95

MagArt AdditiveBloxShop Magnetic Additive for Paint
Easy . Safe . Economical . Fun​


​COVERAGE 
Mix 1 jar Additive with 2 cups of paint.
Covers up to 10 sq. feet with 2-3 coats.
10 sq. ft = 5'x2' or 3+' x 3+' 
Total time: 2-3 hours 


20 sq. ft = mix 2 jars of additive into 1 quart of paint
30 sq. ft = mix 3 jars of additive into 1.5 quarts (6 cups) of paint
40 sq. ft. = mix 4 jars of additive into 2 quarts (1/2 gallon) of paint


To measure square footage for small areas, take desired height and multiply times width.
How to measure square feet for large spaces: http://www.wikihow.com/Measure-Square-Footage
​
For more information: https://www.bloxshop.com/magpaint.html

 

BUY

On Sale

On Sale

---

Easy . Safe . Economical . Fun

​SIMPLE DIRECTIONS
​Apply like regular paint.  Cleans with soap and water. Use Foam Roller for smooth finish. 
Stir in between coats.  Apply with textured roller for a textured look.  (not as many coats will be needed)
Results vary depending on the paint used, technique, surface characteristics, and environmental conditions.

---

1, 2, 3 COATS 

1 coat

2 coats

3 coats

---

​TIPS
Ratio of additive to paint: 1 part additive to 3 parts paint, however you may use 1 part additive to 2 parts paint if you'd like the process
to go faster - and only need 1-2 coats. Use fan between coats for faster drying time.  Do not add water to paint.
 If wall has never been primed or is in poor condition, add Additive to white primer and apply.  Then top with any color over magnetic primer. 
Up to 2 coats can be applied over your magneti wall...including chalkboard paint and/or dry erase paint.

---

MagArt Blox

CompassionArt

Donor Appreciation Wall - Los Angeles, California