WALL-BEING - Magnetic Additive for Paint
BloxShop Magnetic Additive for Paint
Easy . Safe . Economical . Fun
Mix 1 jar Additive with 2 cups of paint.
Covers up to 10 sq. feet with 2-3 coats.
10 sq. ft = 5'x2' or 3+' x 3+'
Total time: 2-3 hours
20 sq. ft = mix 2 jars of additive into 1 quart of paint
30 sq. ft = mix 3 jars of additive into 1.5 quarts (6 cups) of paint
40 sq. ft. = mix 4 jars of additive into 2 quarts (1/2 gallon) of paint
To measure square footage for small areas, take desired height and multiply times width.
How to measure square feet for large spaces: http://www.wikihow.com/Measure-Square-Footage
For more information: https://www.bloxshop.com/magpaint.html
Better Than Canned Magnetic Primer
• IT's EASY TO STIR
Simply add the additive to any color paint. Stir for one minute.
• YOU CHOOSE THE COLOR
Use whatever color paint you want!
• IT's QUICKER
You'll need fewer coats.
• IT's STRONGER
With no need for a top coat, magnets stick better.
• IT's CLEANER & DOESN'T SMELL
Almost no splatter. Cleans with water. Doesn't stink.
• ADDITIVE GIVES MORE OPTIONS
No top coat is needed, however, you may add chalk board paint, white board paint, or faux finish.
Apply like regular paint. Cleans with soap and water. Use Foam Roller for smooth finish.
Stir in between coats. Apply with textured roller for a textured look. (not as many coats will be needed)
Results vary depending on the paint used, technique, surface characteristics, and environmental conditions.
1. Outline area with ruler and pencil.
2. Tape around pencil line with painter's tape.
3. Pour measured paint into tray & stir 1 mn.
4. Add additive to paint & stir 1 mn.
5. Let dry well between coats (45 mn.)
6. Test for strength.
7. Let cure 18-24 hours.
Made in USA
All Rights Reserved Protected Under Patent No. US 8,522,464 B2 & Patents Pending